All Products
Contact Person :
HE
Phone Number :
18729501099
Second-Line System Of PH Transmitter (Continuous monitoring of PH in solutions of metallurgy, environmental protection,
| 1.Measuring Range: | PH Value 0~14.00pH, Resolution: 0.01pH Temperature-9.9~99.9℃, Resolution: 0.1℃ |
|---|---|
| 2.Test Water Sample: | 0~100℃, 0.6MPa |
| 3.Working Conditions: | Ambient Temperature: 0~70℃, Relative Humidity: <70% |
CYW71C Anti-corrosion type input Liquid level transmitter (Measurement of a corrosive liquid/4~20mA, hart, RS485
| 1.Range: | 0~20~200kPa |
|---|---|
| 2.Out Put: | 4~20mA、4~20mA HART、RS485 |
| 3.Power Supply: | 9~28VDC、13~28VDC、15~28VDC、15~24VDC |
MPS5X00 Series Radar Bit Meter Is W Band (80GHz) FM Continuous Wave Radar Bit Meter
| 1.Measurement Accurac: | 2mm |
|---|---|
| 2.Process Pressure: | -1...16bar (rod Type) / -1...2bar (plastic Horn) |
| 3.Process Temperature: | -40~200°C |
Rectangular Flowmeter (Accurately measure the flow rate of the fluid
| 1. Flow Measurementaccuracy: | Class 1.0(can Be Calibrated To Class 0.25) |
|---|---|
| 2.Medium Temperature: | -196°C~+600°C |
| 3.Diameter Range: | DN25-DN600 |
TEMPERATURE AND PRESSURE COMPENSATION OF THE INTEGRATED FLOW METER
| 1.Diameter Range: | DN25-DN600 |
|---|---|
| 2.Flow Measurementaccuracy: | Class 1.0(can Be Calibrated To Class 0.25) |
| 3.Medium Temperature: | -196°C~+600°C |
DFF Air Volume Measuring Device (Measure the air volume in the tube)
| 1.Accuracy Class: | Class 1 |
|---|---|
| 2. Measurement Type: | Air Volume Measurement And Wind Speed Measurement |
| 3.Installation Method: | Plug-in, Pipe Type |
WRG series armored thermocouple/ Measuring range;-40 ° C~1300 ° C/Electrical interfaceN:NPT1/2"internal screw
| Measuring Range: | -40 ° C~1300 ° C (material Determined Based On Temperature And Medium) |
|---|---|
| Scale Division: | K、 N、 E、 J 、T 、S、 B 、R |
| Installation Method: | Flange Type, Threaded Type, Welded Type |
HVH Black Water Regulating Valve High Viscous Fluid Valve Mud And Multiphase Fluid
| 1.Leakage Level: | ANSI Class IV |
|---|---|
| 2.Connection Method: | Flange Type |
| 3.Temperature Range: | -45~+566 ℃ |
HVP3 Series Locators (Non-Invasive Operation, Compound Explosion-Proof Gas / Dust), Lightning Protection, High Protect
| 1.Incoming Signal: | 4 ~ 20 MA And Digital Signals |
|---|---|
| 2. Input Impedence: | 450 Q |
| 3.Accuracy Class: | Level 0.5 |
VF04E Limit Switch Explosion Proof For Petroleum, Chemical Industry, Metallurgy
| 1.Explosion-proof Type: | Ntrinsically Safe Type / Local Safety Dust Type / Explosive Isolation Type / Dust Shell Type |
|---|---|
| 2.Ambient Temperature: | -40℃℃ ~ + 80℃℃ / -50℃℃ ~ + 80℃℃ (low-temperature Type) |
| 3.switch: | Inductor Proximity Switch NJ 2-V3-Nx 2; Active 8V DC Inductance Proximity Switch SN3.5-SNx2 (low Temperature Type); Active 8V DC Mechanical Switch Switchx2:15A / 220V: AC |